Product Description
SmartPlug ELCI Sensor & Breaker Combo Kit
- Power and fault status indicators
- Provides identification of a ground fault vs. short circuit trip
- Chemical and UV resistant enclosure
- Trip level of sensing device < 30mA (27mA nominal) at trip time of < 100mS (60mS nominal) per E-11
- Protection range and operating voltage: 0-50 Amps, 120 VAC, 120/240 VAC
- Unit operating tempature is -35 degrees C to +66 degrees C
- Accommodates up to 3 wires, 6 AWG, with no twisting of the wires required
The LineGard™ PGFM product family provides ELCI (equipment leakage) ground fault sensing and is designed and manufactured by North Shore Safety, a leader in innovative safety products. The PGFM series operates in tandem with an Airpax™ LEL series, UL 489 listed circuit breaker, with shunt trip and auxiliary switch manufactured by Sensata Technologies.
The combined assembly of the PGFM and Airpax™ breaker meets the requirements of ABYC E-11 for ground fault protection and main shore power circuit protection. The PGFM constantly monitors the current balance of the conductors (wires / cables) supplying power to the load. When a ground fault of 27mA nominal (30mA max) occurs, the PGFM uses the LEL’s shunt trip coil to signal the breaker trip.
Product Videos
Custom Field
Type Misc
Amperage 50a
California Residents WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
