Product Description
High copper content provides long-term protection against severe bottom fouling.
Ultra-Kote hard antifouling paint is heavily loaded with cuprous oxide for maximum performance in severe fouling conditions. The modified epoxy formula results in a durable finish with excellent color stability. This durable finish stands up to abrasion and when needed, periodic scrubbing by a diver. Ultra-Kote is also low in VOCs, which minimizes its impact on the environment; and it dries quickly so you can paint and launch on the same day. Ultra-Kote is a great choice for fiberglass, steel, and wood boats in brackish or salt water. We offer Ultra-Kote in Red, Blue, Green and Black.
Key Features
- Durable finish stands up to abrasion
- Good choice for medium to high fouling areas
- Excellent color stability
- Low-VOC formula limits solvent emissions
- Suitable for use on power and sailboats in all waters
Physical Data
- Vehicle type: Cuprous oxide
- Finish: Matte
- Available colors: Blue, Green, Red, Black
- Components: 1
- Curing mechanism: Solvent release
- Solids by Volume: (Theoretical): 63%
- Coverage: 506sq. ft./gal.
- VOC: 327d grams/liter (as supplied)
- Active ingredients: 57% Cuprous Oxide
Application
- Application Method: Brush, roller, airless, or conventional spray
- Number of coats recommended: 2 coats, 3 on bare wood (first coat thinned)
- Wet Film Thickness: 3.2 mils/coat
- Dry Film Thickness: 2 mils/coat
- Applicator: High-quality short nap roller (maximum 3/8” nap)
- Application temperature Min. /Max. Range: 10°C/50°F and maximum 35°C/95°F.
- Thinner: Special Thinner 216, Model 117598 , Brush-Ease 433, Model 203679
Drying Times* (Hours)
| Drying | @50°F | @73°F | @95°F |
|---|---|---|---|
| To touch | 3 hr. | 1 hr. | 30 min. |
| To recoat | 6 hr. | 4 hr. | 2 hr. |
| To launch | 12 hr. | 8 hr. | 6 hr. |
*The above dry times are minimums. May be recorded after the minimum time shown. There is no maximum dry time before launching.
Get the right amount of paint:
| Boat Type | Bottom Paint |
|---|---|
| 10' Dinghy | 1 qt. |
| 14' Outboard | 1-2 qt. |
| 18' Runabout | 2 qt. |
| 20' Sailboat | 3 qt. |
| 24' Runabout | 3-4 qt. |
| 30' Sailboat | 1.5 gal. |
| 32' Cruiser | 1.5-2 gal. |
| 36' Auxiliary | 2 gal. |
| 40' Cruiser | 2.5 gal. |
| 45' Sailboat | 3-3.5 gal |
| 50' Sportfisher | 4+ gal. |
Another way to determine bottom paint quantity is to estimate the approximate surface area of the hull below the waterline, using the following formula:
Length x Beam x .75 = Approximate underwater surface area in square feet.
Each paint has a “theoretical coverage” area, but most paints require at least two coats, so you can expect actual coverage to be no greater than half of the theoretical value.
More Information
For detailed application instructions and to view available colors, see the Ultra-kote data sheet. NOTE: Manufacturer data sheets are subject to revision. Linked data sheets are believed to be accurate at the time of publication.
Product Videos
Custom Field
Shipping Only available for shipment via LTL carrier (truck) or for will call at one of our warehouse locations.
PROPOSITION 65 WARNING Cancer and Reproductive Harm – www.P65Warnings.ca.gov
