Product Description
Interlux Brightside - High Gloss Polyurethane Topside Marine Paint
Interlux Brightside Paint is a hard-finish, high gloss, one-part application polyurethane topside finish. This paint offers great application characteristics that result in a professional-looking, “sprayed on” appearance when brush-applied in thin coats. It is recommended for application on surfaces above the true waterline. To ensure high-gloss retention, Interlux Brightside Polyurethane contains Poly flow 4000 resins and surface stabilizers. Additionally, its fluro micro-additive allows for easy clean-ups, is stain resistant, and provides added abrasion resistance.
When used as a marine polyurethane, Interlux Brightside is suitable for application on hulls, decks, as well as exterior/interior cabins and trim.
Interlux Brightside Polyurethane Features:
- Hard, high gloss, one-part polyurethane finish
- Excellent flow and leveling characteristics create smooth finish even when applied with a brush
- Interlux Brightside Polyurethane is a topside paint - Recommended for use above true waterline
- Fluro Micro-additive formula permits easy cleaning, added stain/abrasion resistance
- For use with single-part primers, enamels, or polyurethanes
- Available in a range of bright, crisp colors
Specifications:
- Finish: High Gloss
- Number of Coats: 2 minimum
- Coverage: 550 ft²/gal. by brush, 440 ft²/gal. by spray.
- Pack Size: 1 US Quart, 1 US Gallon (White Only)
- Colors Available: YELLOW (INT4152QT), BLUE GLO WHITE (INT4259Q), LIGHT BLUE (INT4351Q), MED BLUE (INT4353Q) DARK BLUE ( INT4316Q), OCEAN BLUE (INT4253Q), SAPPHIRE BLUE (INT4241Q), BRISTOL BEIGE (INT4207Q), GRD BANK BEIG (INT4217Q), SUNDOWN BUFF (INT4237Q), HATER OFF-WHIE (INT4208Q), OFF-WHITE (INT4381Q), and WHITE (INT4359Q)
- VOC: Less than 325 grams/liter (2.75 lbs./gal.)
How To Apply Interlux Brightside Paint
- Application Method: Airless Spray, Brush, Roller, Conventional Spray - Pressure Pot or Siphon Cup
- Number of Coats: 2 Minimum
- Coverage: 495 ft²/gal by brush, 264 ft²/gal by spray
- Application Temp: 50°F Min. / 95°F Max.
- Thinner:Brushing Liquid 333, Spraying Thinner 216
Dry Times
|
Temp |
Touch Dry |
Minimum Sanding Time |
|
50°F |
3 Hours |
16 Hours |
|
75°F |
2 Hours |
12 Hours |
|
95°F |
1 Hour |
8 Hours |
Surface Preparation
Previously Painted Surfaces:
- Clean and dry the surface prior to application.
- Wipe down with Interlux Brushing Liquid 333 or Special Thinner 216 to remove any surface debris.
- Sand with 220-320 grade (grit) paper. Remove sanding residue.
Bare Fiberglass:
- If in Good Condition - Begin by scrubbing well using soap and water and a stiff brush. Rinse with fresh water. Remove wax and other contaminants using either Fiberglass Solvent Wash 202 or Fiberglass Surface Prep YMA601V. Sand with 220-320 grade (grit) paper. Remove all traces of sanding residue.
- If in Poor Condition - Clean as above. Sand with 80 grade (grit) paper. Apply Pre-Kote.
Clear Epoxy:
- After the epoxy has cured, remove any amine blush by scrubbing well using soap and water, and a stiff brush, or by using Fiberglass Surface Prep YMA601V.
- Rinse with fresh water and allow to dry completely. Sand with 80 grade (grit) paper.
- Remove sanding residue. Apply one coat of Epoxy Primekote 404/414.
Bare Wood:
- Sand surface with 180-220 grade (grit) paper, wipe clean.
- Apply Pre-Kote. Sand surface with 220 grade (grit) paper, wipe clean.
Bare Metal:
- Sandblast or grind, remove all sanding residue.
- Immediately apply Interprotect 2000E thinned 15% with Interlux Solvent 2316N. When the Interprotect is thumb-print tacky apply one coat of Epoxy Primekote 404/414.
- Sand with 220 grade (grit) paper. Remove sanding residue.
Interlux Brightside Application Information
- Apply 2-3 coats of Interlux Brightside Paint NOTE: Allow a minimum of 16 hours between coats.
- Sand between coats with 320-grit sandpaper.
- NOTE: Avoid applying late in the day as condensation can cause loss of gloss overnight.
- In warm or windy conditions, up to 10% Interlux Brushing Liquid 333 may be added to ease application.
Do not exceed 10% thinner by volume
Click to Download Brightside Application Instructions
California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov
