Product Description
Git Rot Kit - Quart
Unique two-part liquid epoxy saturates and restores original strength to wood by penetrating the rot. Actually works with the loose rotted fibers. Wood must be dry. Apply by injecting into wood. Will soak into wood by capillary action. One-half hour pot life after mixing. Cures overnight. Sandable and paintable, can be drilled and screwed. Compatible with fiberglass resins, epoxies and most sealants. Great for transoms, stringers and cabin roof rot in both fiberglass and wood boats.
*Note: This product is available for Ground Shipping Only
WARNING: This product can expose you to chemicals including Di-n-butyl Phthalate which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.
Product Videos
Custom Field
Product Reviews
1 Review Hide Reviews Show Reviews
-
This stuff is great
This stuff is great!!! Used to to coat some wood that was going to be slightly exposed to the elements. Works like a champ!! Takes quite a while to dry at lower temps... like 3 days in my case. Goes a long way also!! I bought two quarts and I have a whole one left over unopened... I coated about 18sqf. I went over it three times. I was coating oak 3/4 plywood. It doesn't smell very bad either... but when they say only mix 4 oz at a time. .. listen!! I made 8oz and lost about 3 because it started boiling in the mixing bowl before I was finished.. still have burnt finger tips to proove it. Even with all that I still have at least 4oz left of the first bottle. The wood I was coating was not damaged but new.. I did is as a preventative measure. Because the original wood was slightly damaged from water.
