Product Description
AIRHEAD ANCHOR BUNGEE & ANCHOR BUNGEE LITE
AIRHEAD Anchor Bungee enables you to tether your boat offshore, away from a beach or rocky shoreline without having to swim or use a dinghy. Connect an anchor to your boat with the high tensile strength Anchor Bungee and set the anchor offshore. A heavy duty zinc plated shackle and snap hook are provided for attaching the Anchor Bungee to your anchor and boat. Tie a line to the stern to pull the boat into the shore to unload your group. Simply secure the end of the rope to a stake onshore and release the rope; Anchor Bungee will pull the boat away from shore into safe waters. Anchor Bungee flexes to relieve stress on the anchor, increasing its holding power. The bright red and yellow 16 strand 2500 lb. tensile strength rope is easy to spot and is constructed of polypropylene so it floats. Use it once and you'll wonder how you ever lived without.
Specifications:
- Tether your boat offshore, away from a beach or rocky shoreline
- Connect anchor to with the high tensile strength Anchor Bungee to set the anchor offshore
- Heavy duty zinc plated shackle and snap hook for attaching the Anchor Bungee to your anchor and boat
- Anchor Bungee will pull the boat away from shore into safe waters
- 16 strand 2500 lb. tensile strength polypropylene rope, easy to spot, floats and stretches from 14 feet to 50 feet, Ideal for Boats
California Residents
WARNING: This product can expose you to chemicals including Vinyl chloride, which is known to the State of California to cause cancer, and Di-n-hexyl Phthalate (DnHP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Product Videos
Custom Field
Product Reviews
2 Reviews Hide Reviews Show Reviews
-
Good Quality
It is as described and is of good quality. I use it to anchor a 10’ x 10’ raft in a lake and it works well.
-
Works like the anchor buddy
Instead of beaching your boat, this bungee works well. Used at the stern of my boat and a shore spike at the bow. My anchor is a 15lbs fluke with a slide ring. I highly recommend to use your regular anchor rope along side the anchor bungee. For this reason, easy to set and retrieve your anchor. DO NOT USE THE BUNGEE FOR EITHER OR... Drop anchor with both bungee and rope attached. Wait till your anchor hits ground then pull a little bit of slack off the rope. Not too much. Tie off the rope and bungee to the front bow cleat. Slowly drive your boat in reverse towards the shore you'll be hanging out. You should've been about 20-30ft away from shore. Once your anchor sets, drive forward just enough to loosen tension off the anchor rope. Untie the rope from your boat and tie a buoy to the rope. Toss it over board. If possible move the bungee from the bow to stern. Drive towards shore. Set your shore spike and unload your gear and passengers. Once your done loosen your docking rope from the spike and watch your boat float safely away from shore. Tie off the dock rope on to the spike and TADA!!! To retrieve, pull the dock rope, load what you want, and untie from the spike. The bungee will pull you back into deeper water towards your buoy. Disconnect the bungee from your boat and tie it off to the buoy for easy retrieval when you return. You have an idea by now how this works. Its great and easy to use. At least for me. Common sense is all it take to use this bungee. Like I mentioned.... DO NOT USE THIS BUNGEE TO SET OR RETRIEVE YOUR ANCHOR! This is why I recommend to use an anchor rope along side. This bungee will break and your out of an anchor. Happy Boating!!!
